Language: Chinese ∷  English


Effective measures to extend tyre life

Effective measures to extend tyre life
1. Master the inflation standard and refill the tyres in time
The purpose of stipulating the tyre gas standard is to ensure that the tyre has a certain degree of elasticity, so that its deformation does not exceed the specified range when bearing the specified load, and to ensure that the vehicle has good stability and comfort during driving. Therefore, the tyre gas standards must be strictly observed during use. After the tyre is inflated, even if the inner tube and valve core are intact, it will leak on its own. Therefore, check the tyre pressure frequently to ensure that the tyre pressure meets the standard.
2. Correct selection and installation, and regular transposition
If conditions permit, it is best to use tyres of the same type, pattern, and newness on the same car.
When installing tyres, pay attention to the following points: the tyres at the axle or corresponding positions should be exactly the same; when changing to new tyres, the new tyres should be installed on the front wheels; the repaired tyres are best installed on the rear wheels. Due to the different installation positions of the tyres, their working conditions and loads are also different (generally, the rear tyres carry more load than the front wheels). After a car has been driven for a period of time, the front and rear tyres will have different fatigue and wear levels. Therefore, it should Reposition the tyres in time as required. There are two types of tyre rotation: cross method and round robin method. The cross transposition method is suitable for cars that often drive on a larger arched road, while the cyclic transposition method is suitable for cars that often drive on a relatively flat road.
3. Control the tyre temperature and keep driving at a medium speed
When the car is running, the tyre generates heat due to friction and deformation, which increases the temperature and air pressure inside the tyre. Although the temperature inside the tyre is not easy to measure, we can judge the temperature of the tyre based on the degree of increase in air pressure. The greater the increase in air pressure, the higher the tyre temperature. When the tyre temperature is high, you should remember: 1. Do not pour cold water, because the cold water will suddenly cool the tyres and easily cause tyre cracks; 2. Do not deflate, because deflation can temporarily drop the air pressure, but it cannot make The tyre temperature drop down, and only by taking cooling measures can the tyre temperature be controlled. Therefore, when the tyre temperature is found to be too high, you should stop and rest in a cool place to reduce the tyre temperature before you can continue driving.
4. Strengthen inspections to ensure that each assembly of the driving system is in good technical condition
Inspect and adjust each assembly of the driving system in time to ensure that it is in a good technical condition, so that the tyres can avoid undue severe wear and mechanical damage.
5. Strengthen the maintenance of tyres
There are two types of tyre maintenance: daily maintenance and regular maintenance. We must follow the routine maintenance and regular maintenance specifications.
To sum up, the service life of tyres is affected by many factors such as the use and maintenance conditions of the tyres, the technical condition of the motor vehicle itself, the operating level of the driver, the maintenance of the tyres, and many other factors. As long as the tyres are used and maintained correctly and reasonably, the tyres are reduced. The wear speed of the tyre can prevent abnormal wear and early damage, which can greatly extend the service life of the tyre.



    Contact: Sophie Qiu

    Phone: +86-18100666929

    Tel: +86-510-80660180

    Email: info@doublesafe.com.cn


    Scan the qr codeClose
    the qr code